504 products - Alibaba.com offers 504 japanese binoculars products. About 37% of these are telescope & binoculars, 30% are microscopes, and 1% are other.
Collecting Old Binoculars
For anyone interested in collecting old binoculars then follow me and lets see what we can discover.
Binoculars have been around and in general useand good quantity since the 1800s. They are the bygone instruments which have been widely used for a long time now, and are still being produced today. Indeed today's instruments are as easily recognizable as those produced many years ago, especially in their design shape, although the technology regarding materials, prisms and lenses has taken great leaps forward. Having said that, even today's late 20th century binoculars are still using the 'ABBE-PORRO' principle of design first used in the late 1800s.
Now, as we have moved into the 21st century, it is still relatively easy to find such fascinating old instruments dating from the middle-late 1800s to the early-mid 1900s. And there is a fascinating history attached, as these instruments were used for pleasure and work, through peace and war. Don't forget, apart from the good times we have had two world wars and many minor wars since Queen Victoria reigned, and the military as well as the general public used these instruments in great numbers, and indeed still do.
So there you go!! Think about it as there is great scope for collecting.
The picture shows a pair of Zeiss WW11 6x50 binoculars.
Collecting Old Binoculars - Books on Old Binoculars
For anyone interested I have written several books on Collecting Old Binoculars (Self Published)
Collecting Old Binoculars
Collecting Old Ross Binoculars
Collecting Old German Binoculars
Collecting Old French Binoculars & Opera Glasses
Collecting Old North American Binoculars
You can find them on my publishers site - go direct to - http://www.lulu.com/spotlight/briseham
Old Binoculars - Wartime
During WW1 and WW11 all British binoculars that were used by the Armed Forces were stamped with the Ministry Broad Arrow.
At the time of WW1 there was a shortage of binoculars, so the military 'bought in' a lot of binoculars. These binoculars could have been French, German, or from private individuals ect, wherever they could find them.
WW1'bought in' binoculars were stamped as follows:-
S.1 High Grade Prismatic Binoculars
S.2 Second Grade Prismatic Binoculars
S.3 High Grade Galilean Binoculars
S.4 Second Grade Galilean Binoculars
S.5 Third Grade Binoculars Of Either Type
S.6 Unusual Design Binoculars
And of course they had the Ministry Broad Arrow.
Also we have the Brirish Army Markings for Prismatic Binoculars.
No 1 8 x 20 1907
No 2 Mk 1-111 6 x 30 1909
No 3 Mk 1-11 6 x 20 1911
No 4 Mk 1 6 x 30 1927
No 5 Mk 1-V 7 x 50 1935
No 6 Mk 1 4 x 24 1936
Again also marked with the Broad Arrow.
Another set of markings which are well worth mentioning are the German WW11 manufacturers codes.
The Germans decided during the war that they did not want the allies to know where their optics were manufactured ( to stop the bombing of the factories?) so they had the following codes put on their binoculars. This is just a list of some of the main codes as there were rather a lot, and they can be looked up on the internet.
Some German Manufacturers' Codes for WW11.
Beh Ernst Leitz - Wetzlar - Germany
Blc Carl Zeiss, Militarabteilung - Jena - Germany
Bmj Hensoldt & Sohne - Wetzlar - Germany
Bmt Steinheil & Sohne - Munich - Germany
Bpd Goerz - Vienna - Austria
Cag Swarovski - Wattens/Tirol - Austria
Cxn Emil Busch - Rathenow -Germany
Ddx Voigtlander & Sohne - Brunswick - Germany
Dkl Joseph Schneider - Kreutznach - Germany
Dzl Oigee - Berlin - Schoneberg - Germany
Eaw R. winkel - Gottingen - Germany
Eso G. Rodenstok - Munich - Germany
Esu Steinheil & Sohne - Munich - Germany
Eug Optische Prazisions Werke - Warsaw - Poland
Fvx Beck & Sohne - Kassel - Germany
Gwv Ernst Plank - Nurnberg - Germany
Jfp Dr Carl Leiss - Berlin - Germany
Nms Richard Holz - Berlin - Germany
Rin Carl Zeiss - Jena - Germany
The picture is of a standard pair of Galilean Binoculars issued to the German Army in 1908 - This pair is made by Spindler & Hoyer, but they were also produced by other factories - so they could be by Zeiss, Goerz etc. Many of these binoculars were used right through to WW11.
British Makers of Binoculars (A Few Old Names)
Here are a few British makers to look for - these are probably the most well known.
If you look into the history of some of these makers, you will find that many of them started out in the Optical business such as Opticians and lense makers.
Many of them would have also produced Cameras, Microscopes etc.
J.H. Steward London
Dolland London
Dolland & Aitchison London - From 1927
John Browning London
Ross London - Army - Navy
Kershaw Leeds - Army
Taylor-Hobson Leicester - Army
Watson London - Army
Wray London - Air Ministry
Barr & Stroud Glasgow - Royay Navy
Aitchison London - Leeds
Cox Devonport - Plymouth
Coombes Devonport - Plymouth
Hughes Liverpool
Here are some notes on other Binocular Marks:-
You may find engraved the Letters 'KO' (with the K on top of the O). This means that the instrument was tested at - The Kew Observatory.
The 'KO' should be followed by a number, which is the number of the Test Certificate.
This ran from - C.1878 to 1912.
Other letters you may find are 'NPL' which is the National Physical Laboratory.
The letter 'N' is followed by 'P' over 'L' and a number, for instance - '43', which would mean it was tested in 1943. C.192 - .
Then there is also the Broad Arrow.
This Arrow was used buy the British Government & Military to mark ownership.
The sign was also used as a mark of testing, so a full Broad Arrow meant the instrument was up to standard.
Searching for Old Binoculars
This is me in my search for old binoculars at an Antiques Fair.
It was done just to show people what is out there on the market - enjoy with all its faults.
There are many places you can buy Old Binoculars.
The video was at a large AntiquesFair but also you can look at :-
Ebay or other Online Auctions, Antique shops, Car Boots, Auction Houses or even Charity Shops
Old Ross Binoculars
Ross were one of the great British Binocular Makers.
Andrew Ross was the man who started it all. Born in 1798 - Died in 1859.
He eventually became an Optician and started his own business in 1830 at Wigmore Street, London.
From around 1837 - 1841 they were trading as Andrew Ross & Co.
In 1859 they were trading as - Ross & Co. The company name changed to Ross Ltd in 1897.
Around 1949 they became Barnet Ensign Ross Ltd, and soon after they changed to Ross Ensign.
Ross closed in 1975.
Their main factory in the 1900s was - The Optical Works, Clapham Common, London, SW4.
Ross continuosly manufactured binoculars from the 1830s, and over the years very many were produced for the military with WW1 & WW11 being a very good collecting area.
Old French Binoculars & Opera Glasses
Old French binoculars are of course another collectable area, but when it comes to WW1 & WW11 then I think they become even more interesting.
During WW11 the Germans started coding all their binoculars to hide their place of manufacture.
Anyway, during WW11 France was 'occupied' and so Binoculars made in France for Germany were given a code which was stamped on the binocular.
Hence:-
Iww. Huet et Cie, Paris France.
Iwx. Optique et Precision de Levallois, Paris France.
Lwy. Societe Optique et Mecanique de Haute Precision, Paris France.
Also during WW1 when there was a huge shortage of binoculars, the British 'bought in' Binoculars from all sorts of places including France.
So you may well come across a pair of British Army Binoculars which are actually French.
Bought in binoculars were stamped by the British Military, so you may have a pair of French Binoculars marked like this - for example
Name. Huet - Paris
Mark. Ministry Broad Arrow
Mark. S.1 (high grade prismatic binoculars)
Mark. MG ( French - Ministere de la Guerre) (Ministry of War)
Good fun looking for these binoculars and also they are easy to date.
Now this is where I think the French came into their own - Opera Glasses.
A lot of Opera Glasses were produced in the 1800s and early 1900s, but I don't think anyone made such beautiful glasses as the French.
Depending on the level of decoration and condition, some of these Opera Glasses can be quite ex[pensive.
Look out for decorations in :-
Tortoiseshell, Gold, Silver, Mother of Pearl, Bone, Ivory, Enamel etc.
Great stuff.
Look out for these French names.
Huet Paris. Lumiere Paris. Iris Paris. Bardou Paris. Chevalier Paris. Colmont Paris. Marchand Paris.
Love these posters.
During the war there were of course many posters warning about the enemy etc.
The ones I love of course are about loaning your Binoculars to the government.
There are a few of these posters about ( mainly repro!!), but they may make your collecting more interesting.
Old Adverts help with collecting
This is fun!!
Trawl around for old adverts.
Look on Ebay - search the internet - look at old publications.
It's amazing how many old adverts there are, and you will find them for very many binocular makers and sellers - British, French, German, American, etc
These adverts also help with dating the binoculars.
Maybe you have a pair of old binoculars they are advertising??
This picture is an old advert - late 1800s - for the French company Lemaire. (Very collectable Opera Glasses)
Reply to H Geddes. HI, I don't actually know anyone in London who does repairs. I hope these will help. www.opticalrepairs.com -
www.actionoptics.co.uk - www.quicktest.co.uk - www.intrasights.co.uk
A typical Porro prism binoculars design
Binoculars, by Father Chérubin d'Orléans, 1681, Musée des Arts et Métiers
Binoculars or field glasses are two telescopes mounted side-by-side and aligned to point in the same direction, allowing the viewer to use both eyes (binocular vision) when viewing distant objects. Most are sized to be held using both hands, although sizes vary widely from opera glasses to large pedestal mounted military models.
Unlike a (monocular) telescope, binoculars give users a three-dimensional(3D) image: for nearer objects the two views, presented to each of the viewer's eyes from slightly different viewpoints, produce a merged view with an impression of depth.
Optical designs[edit]Galilean binoculars[edit]
Galilean binoculars
Almost from the invention of the telescope in the 17th century the advantages of mounting two of them side by side for binocular vision seems to have been explored.[1] Most early binoculars used Galilean optics; that is, they used a convexobjective and a concaveeyepiece lens. The Galilean design has the advantage of presenting an erect image but has a narrow field of view and is not capable of very high magnification. This type of construction is still used in very cheap models and in opera glasses or theater glasses. The Galilean design is also used in low magnification binocular surgical and jewelers' loupes because they can be very short and produce an upright image without extra or unusual erecting optics, reducing expense and overall weight. They also have large exit pupils making centering less critical and the narrow field of view works well in those applications.[2] These are typically mounted on an eyeglass frame or custom-fit onto eyeglasses.
Binoculars with Keplerian optics[edit]
An improved image and higher magnification is achieved in binoculars employing Keplerian optics, where the image formed by the objective lens is viewed through a positive eyepiece lens (ocular). Since the Keplerian configuration produces an inverted image, different methods are used to turn the image right way up.
Binoculars with erecting lenses[edit]
Cross-section of relay lens assembly â system 2.
In aprismatic binoculars with Keplerian optics (which were sometimes called 'twin telescopes') each tube has one or two additional lenses (relay lens) between the objective and the ocular. These lenses are used to erect the image. The binoculars with erecting lenses had a serious disadvantage: they are too long. Such binoculars were popular in the 1800s (for example, G.& S. Merz models), but became obsolete shortly after the Karl Zeiss company introduced improved prism binoculars in the 1890s.[3]
Prism binoculars[edit]
Optical prisms added to the design are another way to turn the image right way up, usually in a Porro prism or roof-prisms design.[4]
Porro prism binoculars[edit]
Double Porro prism design
Porro prism binoculars
Porro prism binoculars are named after Italian optician Ignazio Porro who patented this image erecting system in 1854, which was later refined by makers like the Carl Zeiss company in the 1890s.[1] Binoculars of this type use a pair of Porro prisms in a Z-shaped configuration to erect the image. This results in binoculars that are wide, with objective lenses that are well separated and offset from the eyepieces, giving a better sensation of depth. Porro prism designs have the added benefit of folding the optical path so that the physical length of the binoculars is less than the focal length of the objective.
Roof-prisms binoculars[edit]
Abbe-Koenig 'roof' prism design
Binoculars with Schmidt-Pechan 'roof' prisms
Binoculars using roof prisms may have appeared as early as the 1870s in a design by Achille Victor Emile Daubresse.[5][6] In 1897 Moritz Hensoldt began marketing roof prism binoculars. Most roof prism binoculars use either the Abbe-Koenig prism (named after Ernst Karl Abbe and Albert Koenig and patented by Carl Zeiss in 1905) or the Schmidt-Pechan prism (invented in 1899) designs to erect the image and fold the optical path. They have objective lenses that are approximately in line with the eyepieces.
Roof-prisms designs create an instrument that is narrower and more compact than Porro prisms. There is also a difference in image brightness. Porro-prism binoculars will inherently produce a brighter image than Schmidt-Pechanroof-prism binoculars of the same magnification, objective size, and optical quality, because this roof-prism design employs silvered surfaces that reduce light transmission by 12% to 15%. Roof-prisms designs also require tighter tolerances for alignment of their optical elements (collimation). This adds to their expense since the design requires them to use fixed elements that need to be set at a high degree of collimation at the factory. Porro prisms binoculars occasionally need their prism sets to be re-aligned to bring them into collimation. The fixed alignment in roof-prism designs means the binoculars normally will not need re-collimation.[7]
Optical parameters[edit]
Parameters listed on the prism cover plate describing 7 power magnification binoculars with a 50 mm objectivediameter and a 372 foot (113 m) field of view at 1,000 yards (910 m)
Binoculars are usually designed for specific applications. These different designs require certain optical parameters which may be listed on the prism cover plate of the binoculars. Those parameters are:
Magnification[edit]
Given as the first number in a binocular description (e.g. 7x35, 8x50), magnification is the ratio of the focal length of the objective divided by the focal length of the eyepiece. This gives the magnifying power of binoculars (sometimes expressed as 'diameters'). A magnification factor of 7, for example, produces an image 7 times larger than the original seen from that distance. The desirable amount of magnification depends upon the intended application, and in most binoculars is a permanent, non-adjustable feature of the device (zoom binoculars are the exception). Hand-held binoculars typically have magnifications ranging from 7x to 10x, so they will be less susceptible to the effects of shaking hands.[8] A larger magnification leads to a smaller field of view and may require a tripod for image stability. Some specialized binoculars for astronomy or military use have magnifications ranging from 15x to 25x.[9]
Objective diameter[edit]
Given as the second number in a binocular description (e.g. 7x35, 8x50), the diameter of the objective lens determines the resolution (sharpness) and how much light can be gathered to form an image. When two different binoculars have equal magnification, equal quality, and produce a sufficiently matched exit pupil (see below), the larger objective diameter produces a 'brighter' [10][11][12]and sharper image.[13][14] An 8Ã40, then, will produce a 'brighter' and sharper image than an 8Ã25, even though both enlarge the image an identical eight times. The larger front lenses in the 8Ã40 also produce wider beams of light (exit pupil) that leave the eyepieces. This makes it more comfortable to view with an 8Ã40 than an 8Ã25. A 10x50 binoculars is better than an 8x40 for magnification, sharpness and luminous flux. Objective diameter is usually expressed in millimeters. It is customary to categorize binoculars by the magnification à the objective diameter; e.g. 7Ã50. Smaller binoculars may have a diameter of as low as 22 mm; 35 mm and 50 mm is a common diameter for field binoculars; astronomical binoculars have diameters ranging from 70 mm to 150 mm.[9]
Field of view[edit]
The field of view of a pair of binoculars depends on its optical design and in general is inversely proportional to the magnifying power. It is usually notated in a linear value, such as how many feet (meters) in width will be seen at 1,000 yards (or 1,000 m), or in an angular value of how many degrees can be viewed.
Exit pupil[edit]
Binoculars concentrate the light gathered by the objective into a beam whose diameter, the exit pupil, is the objective diameter divided by the magnifying power. For maximum effective light-gathering and brightest image and to maximize the sharpness,[11] the exit pupil should at least equal the diameter of the pupil of the human eye â about 7 mm at night and about 3 mm daytime, reducing with age. If the cone of light streaming out of the binoculars is larger than the pupil it is going into, any light larger than the pupil is wasted. In daytime use the human pupil is typically dilated about 3 mm, which is about the exit pupil of a 7Ã21 binocular. Much larger 7Ã50 binoculars will produce a cone of light bigger than the pupil it is entering, and this light will, in the daytime, be wasted. An exit pupil that is too small will also present an observer with a dimmer view since only a small portion of the light gathering surface of the retina is used.[11][15] For applications where equipment has to be carried (birdwatching, hunting), users opt for much smaller (lighter) binoculars with an exit pupil that matches their expected iris diameter so they will have maximum resolution and are not carrying the weight of wasted aperture.[14]
A larger exit pupil makes it easier to put the eye where it can receive the light: anywhere in the large exit pupil cone of light will do. This ease of placement helps avoid, especially in large field of view binoculars, vignetting, which brings to an image with the borders darkened because the light from them is partially blocked, and it means that the image can be quickly found which is important when looking at birds or game animals that move rapidly, or for a seaman on the deck of a pitching boat or ship. Narrow exit pupil binoculars may also be fatiguing because the instrument must be held exactly in place in front of the eyes to provide a useful image. Finally, many people use their binoculars at dusk, in overcast conditions, and at night, when their pupils are larger. Thus the daytime exit pupil is not a universally desirable standard. For comfort, ease of use, and flexibility in applications, larger binoculars with larger exit pupils are satisfactory choices even if their capability is not fully used by day.
Eye relief[edit]
Eye relief is the distance from the rear eyepiece lens to the exit pupil or eye point.[16] It is the distance the observer must position his or her eye behind the eyepiece in order to see an unvignetted image. The longer the focal length of the eyepiece, the greater the potential eye relief. Binoculars may have eye relief ranging from a few millimeters to 2.5 centimeters or more. Eye relief can be particularly important for eyeglass wearers. The eye of an eyeglass wearer is typically further from the eye piece which necessitates a longer eye relief in order to avoid vignetting and, in the extreme cases, to conserve the entire field of view. Binoculars with short eye relief can also be hard to use in instances where it is difficult to hold them steady.
Close focus distance[edit]
Close focus distance is the closest point that the binocular can focus on. This distance varies from about 0.5 m to 30 m, depending upon the design of the binoculars. If the close focus distance is short respect to the magnification, the binocular can be used also to see particulars not visible to the naked eye.
Eyepieces[edit]
Binocular eyepieces usually consist of three or more lens elements in two or more groups. The lens furthest from the viewer's eye is called the field lens and that closest to the eye the eye lens. The most common configuration is that invented in 1849 by Carl Kellner. In this arrangement, the eye lens is a plano-concave/ double convex achromatic doublet (the flat part of the former facing the eye) and the field lens is a double-convex singlet. A reversed Kellner eyepiece was developed in 1975 and in it the field lens is a double concave/ double convex achromatic doublet and the eye lens is a double convex singlet. The reverse Kellner provides 50% more eye relief and works better with small focal ratios as well as having a slightly wider field.[17]
Wide field binoculars typically utilize some kind of Erfle configuration, patented in 1921. These have five or six elements in three groups. The groups may be two achromatic doublets with a double convex singlet between them or may all be achromatic doublets. These eyepieces tend not to perform as well as Kellner eyepieces at high power because they suffer from astigmatism and ghost images. However they have large eye lenses, excellent eye relief, and are comfortable to use at lower powers.[17]
Mechanical design[edit]Focus and adjustment[edit]
Central-focusing binoculars with adjustable interpupillary distance
![]()
Binoculars have a focusing arrangement which changes the distance between ocular and objective lenses. Normally there are two different arrangements used to provide focus, 'independent focus' and 'central focusing':
There are 'focus-free' or 'fixed-focus' binoculars that have no focusing mechanism other than the eyepiece adjustments that are meant to be set for the user's eyes and left fixed. These are considered to be compromise designs, suited for convenience, but not well suited for work that falls outside their designed range.[18]
Binoculars can be generally used without eyeglasses by myopic (near-sighted) or hyperopic (far-sighted) users simply by adjusting the focus a little further. Most manufacturers leave a little extra available focal-range beyond the infinity-stop/setting to account for this when focusing for infinity.[citation needed] People with severe astigmatism, however, may still need to use their glasses while using binoculars.
People using binoculars
Some binoculars have adjustable magnification, zoom binoculars, intended to give the user the flexibility of having a single pair of binoculars with a wide range of magnifications, usually by moving a 'zoom' lever. This is accomplished by a complex series of adjusting lenses similar to a zoom camera lens. These designs are noted to be a compromise and even a gimmick[19] since they add bulk, complexity and fragility to the binocular. The complex optical path also leads to a narrow field of view and a large drop in brightness at high zoom.[20] Models also have to match the magnification for both eyes throughout the zoom range and hold collimation to avoid eye strain and fatigue.[21]
Most modern binoculars are also adjustable via a hinged construction that enables the distance between the two telescope halves to be adjusted to accommodate viewers with different eye separation or 'interpupillary distance'. Most are optimized for the interpupillary distance (typically 56 mm) for adults.[22]
Image stability[edit]
Some binoculars use image-stabilization technology to reduce shake at higher magnifications. This is done by having a gyroscope move part of the instrument, or by powered mechanisms driven by gyroscopic or inertial detectors, or via a mount designed to oppose and damp the effect of shaking movements. Stabilization may be enabled or disabled by the user as required. These techniques allow binoculars up to 20Ã to be hand-held, and much improve the image stability of lower-power instruments. There are some disadvantages: the image may not be quite as good as the best unstabilized binoculars when tripod-mounted, stabilized binoculars also tend to be more expensive and heavier than similarly specified non-stabilised binoculars.
Alignment[edit]
The two telescopes in binoculars are aligned in parallel (collimated), to produce a single circular, apparently three-dimensional, image. Misalignment will cause the binoculars to produce a double image. Even slight misalignment will cause vague discomfort and visual fatigue as the brain tries to combine the skewed images.[23]
Alignment is performed by small movements to the prisms, by adjusting an internal support cell or by turning external set screws, or by adjusting the position of the objective via eccentric rings built into the objective cell. Alignment is usually done by a professional, although the externally mounted adjustment features can be accessed by the end user.
Optical coatings[edit]
Binoculars with red-colored multicoatings
Because a typical binocular has 6 to 10 optical elements [24] with special characteristics and up to 16 air-to-glass surfaces, binocular manufacturers use different types of optical coatings for technical reasons and to improve the image they produce.
Anti-reflective coatings[edit]
Anti-reflective coatings reduce light lost at every optical surface through reflection at each surface. Reducing reflection via anti-reflective coatings also reduces the amount of 'lost' light present inside the binocular which would otherwise make the image appear hazy (low contrast). A pair of binoculars with good optical coatings may yield a brighter image than uncoated binoculars with a larger objective lens, on account of superior light transmission through the assembly. A classic lens-coating material is magnesium fluoride, which reduces reflected light from 5% to 1%. Modern lens coatings consist of complex multi-layers and reflect only 0.25% or less to yield an image with maximum brightness and natural colors.
Phase correction coatings[edit]
In binoculars with roof prisms the light path is split into two paths that reflect on either side of the roof prism ridge. One half of the light reflects from roof surface 1 to roof surface 2. The other half of the light reflects from roof surface 2 to roof surface 1. This causes the light to become partially polarized (due to a phenomenon called Brewster's angle). During subsequent reflections the direction of this polarization vector is changed but it is changed differently for each path in a manner similar to a Foucault pendulum. When the light following the two paths is recombined the polarization vectors of each path do not coincide. The angle between the two polarization vectors is called the phase shift, or the geometric phase, or the Berry phase. This interference between the two paths with different geometric phase results in a varying intensity distribution in the image reducing apparent contrast and resolution compared to a porro prism erecting system.[25] These unwanted interference effects can be suppressed by vapor depositing a special dielectric coating known as a phase-correction coating or P-coating on the roof surfaces of the roof prism. This coating corrects for the difference in geometric phase between the two paths so both have effectively the same phase shift and no interference degrades the image.
Binoculars using either a SchmidtâPechan roof prism or an AbbeâKoenig roof prism benefit from phase coatings. Porro prism binoculars do not split beams and therefore they do not require any phase coatings.
Metallic mirror coatings[edit]
In binoculars with SchmidtâPechan roof prisms, mirror coatings are added to some surfaces of the roof prism because the light is incident at one of the prism's glass-air boundaries at an angle less than the critical angle so total internal reflection does not occur. Without a mirror coating most of that light would be lost. SchmidtâPechan roof prism aluminum mirror coating (reflectivity of 87% to 93%) or silver mirror coating (reflectivity of 95% to 98%) is used.
In older designs silver mirror coatings were used but these coatings oxidized and lost reflectivity over time in unsealed binoculars. Aluminum mirror coatings were used in later unsealed designs because they did not tarnish even though they have a lower reflectivity than silver. Modern designs use either aluminum or silver. Silver is used in modern high-quality designs which are sealed and filled with a nitrogen or argon inert atmosphere so that the silver mirror coating does not tarnish.[26]
Porro prism binoculars and roof prism binoculars using the AbbeâKoenig roof prism typically do not use mirror coatings because these prisms reflect with 100% reflectivity using total internal reflection in the prism.
Dielectric mirror coatings[edit]
Dielectric coatings are used in SchmidtâPechan roof prisms to cause the prism surfaces to act as a dielectric mirror. The non-metallic dielectric reflective coating is formed from several multilayers of alternating high and low refractive index materials deposited on the roof prism's reflective surfaces. Each single multilayer reflects a narrow band of light frequencies so several multilayers, each tuned to a different color, are required to reflect white light. This multi-multilayer coating increases reflectivity from the prism surfaces by acting as a distributed Bragg reflector. A well-designed dielectric coating can provide a reflectivity of more than 99% across the visible light spectrum. This reflectivity is much improved compared to either an aluminium mirror coating (87% to 93%) or silver mirror coating (95% to 98%).
Porro prism binoculars and roof prism binoculars using the AbbeâKoenig roof prism do not use dielectric coatings because these prisms reflect with very high reflectivity using total internal reflection in the prism rather than requiring a mirror coating.
Terms used to describe coatings[edit]
Special reflective coatings on large naval binoculars
For all binoculars[edit]
The presence of any coatings is typically denoted on binoculars by the following terms:
For binoculars with roof prisms only (not needed for Porro prisms)[edit]
Applications[edit]General use[edit]
Tower Optical coin-operated binoculars
Hand-held binoculars range from small 3 Ã 10 Galilean opera glasses, used in theaters, to glasses with 7 to 12 times magnification and 30 to 50 mm diameter objectives for typical outdoor use.
Many tourist attractions have installed pedestal-mounted, coin-operated binoculars to allow visitors to obtain a closer view of the attraction.
Land surveys and geographic data collection[edit]
Although technology has surpassed using binoculars for data collection, historically these were advanced tools used by geographers and other geoscientists. Field glasses still today can provide visual aid when surveying large areas.
Bird watching[edit]
Birdwatching is a very popular hobby among nature and animal lovers and a binocular is their most basic tool. Typically binoculars with a magnification of 7x to 10x are used.
Hunting[edit]
Hunters commonly use binoculars in the field as a way to see game animals that are too far away to spot with the naked eye. Hunters most commonly use 8x binoculars with light transmission and large enough objectives to gather light in low light conditions.[27]
Range finding[edit]
Many binoculars have a range finding reticle (scale) superimposed upon the view. This scale allows the distance to the object to be estimated if the object's height is known (or estimable). The common mariner 7Ã50 binoculars have these scales with the angle between marks equal to 5 mil.[28] One mil is equivalent to the angle between the top and bottom of an object one meter in height at a distance of 1000 meters.
Therefore, to estimate the distance to an object that is a known height the formula is:
where:
With the typical 5 mil scale (each mark is 5 mil), a lighthouse that is 3 marks high that is known to be 120 meters tall is 8000 meters distance.
Military[edit]
Trench binoculars
Binoculars have a long history of military use. Galilean designs were widely used up to the end of the 19th century when they gave way to porro prism types. Binoculars constructed for general military use tend to be more rugged than their civilian counterparts. They generally avoid fragile center focus arrangements in favor of independent focus, which also makes for easier, more effective weatherproofing. Prism sets in military binoculars may have redundant aluminized coatings on their prism sets to guarantee they don't lose their reflective qualities if they get wet.
One variant form was called 'trench binoculars', a combination of binoculars and periscope, often used for artillery spotting purposes. It projected only a few inches above the parapet, thus keeping the viewer's head safely in the trench.
Military binoculars of the Cold War era were sometimes fitted with passive sensors that detected active IR emissions, while modern ones usually are fitted with filters blocking laser beams used as weapons. Further, binoculars designed for military usage may include a stadiametric reticle in one ocular in order to facilitate range estimation.
Naval ship binoculars
There are binoculars designed specifically for civilian and military use at sea. Hand held models will be 5Ã to 7Ã but with very large prism sets combined with eyepieces designed to give generous eye relief. This optical combination prevents the image vignetting or going dark when the binoculars are pitching and vibrating relative to the viewer's eye. Large, high-magnification models with large objectives are also used in fixed mountings.
Very large binocular naval rangefinders (up to 15 meters separation of the two objective lenses, weight 10 tons, for ranging World War II naval gun targets 25 km away) have been used, although late-20th century technology made this application mostly redundant.
Astronomical[edit]
25 Ã 150 binoculars adapted for astronomical use
Binoculars are widely used by amateur astronomers; their wide field of view makes them useful for comet and supernova seeking (giant binoculars) and general observation (portable binoculars). Binoculars specifically geared towards astronomical viewing will have larger aperture objectives (in the 70 mm or 80 mm range) because the diameter of the objective lens increases the total amount of light captured, and therefore determines the faintest star that can be observed. Binoculars designed specifically for astronomical viewing (often 80 mm and larger) are sometimes designed without prisms in order to allow maximum light transmission. Such binoculars also usually have changeable eyepieces to vary magnification. Binoculars with high magnification and heavy weight usually require some sort of mount to stabilize the image. A magnification of 10x is generally considered the practical limit for observation with handheld binoculars. Binoculars more powerful than 15Ã70 require support of some type. Much larger binoculars have been made by amateur telescope makers, essentially using two refracting or reflecting astronomical telescopes.
Of particular relevance for low-light and astronomical viewing is the ratio between magnifying power and objective lens diameter. A lower magnification facilitates a larger field of view which is useful in viewing the Milky Way and large nebulous objects (referred to as deep sky objects) such as the nebulae and galaxies. The large (typical 7 mm using 7x50) exit pupil [objective (mm)/power] of these devices results in a small portion of the gathered light not being usable by individuals whose pupils do not sufficiently dilate. For example, the pupils of those over 50 rarely dilate over 5 mm wide. The large exit pupil also collects more light from the background sky, effectively decreasing contrast, making the detection of faint objects more difficult except perhaps in remote locations with negligible light pollution. Many astronomical objects of 8 magnitude or brighter, such as the star clusters, nebulae and galaxies listed in the Messier Catalog, are readily viewed in hand-held binoculars in the 35 to 40 mm range, as are found in many households for birding, hunting, and viewing sports events. For observing smaller star clusters, nebulae, and galaxies binocular magnification is an important factor for visibility because these objects appear tiny at typical binocular magnifications.[29]
A simulated view of how the Andromeda Galaxy (Messier 31) would appear in a pair of binoculars
Some open clusters, such as the bright double cluster (NGC 869 and NGC 884) in the constellation Perseus, and globular clusters, such as M13 in Hercules, are easy to spot. Among nebulae, M17 in Sagittarius and the North America Nebula (NGC 7000) in Cygnus are also readily viewed. Binoculars can show a few of the wider-split binary stars such as Albireo in the constellation Cygnus.
A number of solar system objects that are mostly to completely invisible to the human eye are reasonably detectable with medium-size binoculars, including larger craters on the Moon; the dim outer planets Uranus and Neptune; the inner 'minor planets' Ceres, Vesta and Pallas; Saturn's largest moon Titan; and the Galilean moons of Jupiter. Although visible unaided in pollution-free skies, Uranus and Vesta require binoculars for easy detection. 10Ã50 binoculars are limited to an apparent magnitude of +9.5 to +11 depending on sky conditions and observer experience.[30] Asteroids like Interamnia, Davida, Europa and, unless under exceptional conditions Hygiea, are too faint to be seen with commonly sold binoculars. Likewise too faint to be seen with most binoculars are the planetary moons except the Galileans and Titan, and the dwarf planetsPluto and Eris. Other difficult binocular targets include the phases of Venus and the rings of Saturn. Only binoculars with very high magnification, 20x or higher, are capable of discerning Saturn's rings to a recognizable extent. High-power binoculars can sometimes show one or two cloud belts on the disk of Jupiter if optics and observing conditions are sufficiently good.
List of binocular manufacturers[edit]
There are many companies that manufacturer binoculars, both past and present. They include:
See also[edit]References[edit]
Further reading[edit]
External links[edit]
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Binoculars&oldid=904757174'
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |